In order to communicate between various standard series ports of computer, external equipment, or intelligent instruments, It need to suitable device to convert these signals first.
This converter is compatible with RS-232C and RS-422 standard. It is able to convert RS-232 signal to RS-422 balanced differential signal and extend the communication distance to 1.8km. It is passive and doesn’t require external power. It uses a particular pump to gain power from RS-232 signals (RTS, DTR, TXD) without initializing the RS-232 series interface.
An internal transceiver and particular circuit automatically controls the data stream direction instead of handshake signals (such as RTS, DTR, etc.). When works in RS-232 half-duplex mode，the software keeps the same function under RS-422 without any change. The transmission rate of 300-115200bps is capable of applying between host computers, host computer and its external equipments and forms point to point, point to multi-points network.
It is widely used in industrial automation, door safe, all-in-one-card, car parking, ATM, bus charge, eatery sell out, staff attendance management, and highway toll gate etc
1. Interface: Compatible with EIA/TIA RS-232C standard and RS-422 standard.
2. Electronic interface: At the side of RS-232 is a DB9 female (hole-type) connector. At the side of RS-485 is a DB9 male (needle-type) connector, with connection board.
3. Working mode: Asynchronous, half-duplex, differential transmission.
4. Transmission media: Twisted-pair or shielded twisted pair (STP).
5. Transmission rate: 300-115200bps.
6. External dimension: 95mm*33mm*17mm
7. Working environments: -25 degC to 70 degC, relative humidity 5% to 95%.